Factory Direct Re-Verber-Ray Replacement Parts
Current processing time is 1-2 business days. Due to delays with our shipping partners, delivery times can not be guaranteed.
Re-Verber-Ray High Intensity Heater Parts
Re-Verber-Ray® high-intensity infrared space heaters are an ideal heating solution for areas with high air filtration or high ceilings, or where you need to spot heat. Our exclusive design has a proven history and includes a perforated ceramic emitter for maximum conversion to infrared radiation, plus a variety of BTU and control options
RE-VERBER-RAY DR 130 NSPI-8 120V HIGH INTENSITY HEATER
|Part Description||Part Number|
|Combination Gas Valve||36E36A-210|
|Pilot Spark Circuit Board||MARK 6-120|
|Pilot Flame Detector Switch||3049-41|
|Pilot Regulator||RV 12-6|
|Pilot Spark Electrode w/Ignition Wire||760-668|
|Part Description||Qty.1||Part Number|
|Rayhead (assembled with ceramics)||4||DR-RH|
|*Rod for Rayhead, 17-3/8″||36||DR-LROD|
|Short Rod for Rayhead||1||DR-SROD**|
|Heater Reflector Assembly||1||DR-4REF|
|Pilot Access Door w/Screw||1||DR-DOOR|
|Pilot Line (Straight)||1||PL-2|
|Union Fitting, 3 Piece||1||DR-MU|
|DR Cross Over Bracket (45-60 MBH Nat; 45-100 MBH Propane only)||DR-CO|
|DR Flash Shield (130 MBH)||1||DR-FLSH 4|
|1/4″ – 20 x 1/2″ MS Bolt||10||DR-BOLT|
|1/4″ – 20 Hex Nut||10||DR-NUT|
1Indicates the quantity of this part originally installed on the heater. When replacing, you may choose to replace only the non-functioning part(s). If quantities are not indicated consult factory.
*30, 45 & 55 MBH PFS, PMV & PT models use DR-RHP.
**NFS, PFS models require 1 DR-SROD in addition to 35 DR-LRODs.