Factory Direct Re-Verber-Ray Replacement Parts
Current processing time is 1-2 business days. Due to delays with our shipping partners, delivery times can not be guaranteed.
Re-Verber-Ray High Intensity Heater Parts
Re-Verber-Ray® high-intensity infrared space heaters are an ideal heating solution for areas with high air filtration or high ceilings, or where you need to spot heat. Our exclusive design has a proven history and includes a perforated ceramic emitter for maximum conversion to infrared radiation, plus a variety of BTU and control options
RE-VERBER-RAY DR 160 NFS-2 25V HIGH INTENSITY HEATER
|Part Description||Part Number|
|Combination Gas Valve||VR8205A-2123|
|Circuit Board||MARK 10X-24|
|Main Burner Electrode||32-508|
|Ignition Wire, High Voltage||HVW-18|
|Ignition Wire, Low Voltage||LVW-18|
|Part Description||Qty.1||Part Number|
|Rayhead (assembled with ceramics)||5||DR-RH|
|*Rod for Rayhead, 17-3/8″||45||DR-LROD|
|Short Rod for Rayhead||1||DR-SROD**|
|Heater Reflector Assembly||1||DR-5REF|
|Pilot Access Door w/Screw||1||DR-DOOR|
|Pilot Line (Straight)||1||PL-2|
|Union Fitting, 3 Piece||1||DR-MU|
|DR Cross Over Bracket (45-60 MBH Nat; 45-100 MBH Propane only)||DR-CO|
|DR Flash Shield (160 MBH)||1||DR-FLSH 5|
|1/4″ – 20 x 1/2″ MS Bolt||12||DR-BOLT|
|1/4″ – 20 Hex Nut||12||DR-NUT|
1Indicates the quantity of this part originally installed on the heater. When replacing, you may choose to replace only the non-functioning part(s). If quantities are not indicated consult factory.
*30, 45 & 55 MBH PFS, PMV & PT models use DR-RHP.
**NFS, PFS models require 1 DR-SROD in addition to 44 DR-LRODs.