Factory Direct Re-Verber-Ray Replacement Parts
Current processing time is 3-5 business days. Due to delays with our shipping partners, delivery times can not be guaranteed.
USE CODE 'FALL10' FOR 10% OFF
Re-Verber-Ray High Intensity Heater Parts
Re-Verber-Ray® high-intensity infrared space heaters are an ideal heating solution for areas with high air filtration or high ceilings, or where you need to spot heat. Our exclusive design has a proven history and includes a perforated ceramic emitter for maximum conversion to infrared radiation, plus a variety of BTU and control options
RE-VERBER-RAY DR 45-60 PT-2 120V HIGH INTENSITY HEATER
|
|
Part Description |
Part Number |
| Combination Gas Valve | 36C13A-276 |
| Pilot Orifice | 69-0764 |
| Pilot Flame Detector, Thermocouple | Q309A-1970 |
| Pilot Burner | F10-1 |
|
||
Part Description |
Qty.1 |
Part Number |
| Orifice | 2 | Consult Factory |
| Rayhead (assembled with ceramics) | 2 | DR-RH * |
| Rayhead (30-55 MBH models only) | 2 | DR-RHP |
| *Rod for Rayhead, 17-3/8″ | 18 | DR-LROD |
| Short Rod for Rayhead | 1 | DR-SROD ** |
| Heater Reflector Assembly | 1 | DR-2REF |
| Pilot Access Door w/Screw | 1 | DR-DOOR |
| Pilot Shield | 1 | F10-PS |
| Pilot Line (Straight) | 1 | PL-2 |
| Union Fitting, 3 Piece | 1 | DR-MU |
| DR Cross Over Bracket (45-60 MBH Nat; 45-100 MBH Propane only) | DR-CO |
|
| DR Flash Shield (45-60 MBH) | 1 | DR-FLSH 2 |
| 1/4″ – 20 x 1/2″ MS Bolt | 6 | DR-BOLT |
| 1/4″ – 20 Hex Nut | 6 | DR-NUT |
1Indicates the quantity of this part originally installed on the heater. When replacing, you may choose to replace only the non-functioning part(s). If quantities are not indicated consult factory.
*30, 45 & 55 MBH PFS, PMV & PT models use DR-RHP.
**NFS, PFS models require 1 DR-SROD in addition to 17 DR-LRODs.
