As mandated by Michigan’s Governor Whitmer, Detroit Radiant Products will be closed from March 24th through April 13th unless otherwise notified. Parts orders will not ship until then.
Re-Verber-Ray Portable Heater Parts
Our portable infrared heaters are designed for commercial outdoor construction areas or inside areas under construction. They are ideal when temporary heat is required or where a permanent energy source is not available. Our portable construction heater, high-intensity heaters typically mount on top of a 20-lb., 10-inch base LP tank.
|Outer Heater Casing||P-107|
|Propane Orifice Spud||P-109P|
|Natural Gas Orifice Spud||P-109N|
|LP Gas Valve (assembled with all fittings)||P-126|
|Natural Gas Valve (assembled with all fittings)||P-128|
|Outer Heater Casing||P-108|
|Propane Orifice Spud||P-110P|
|Natural Gas Orifice Spud||P-110N|
|LP Gas Valve (assembled with all fittings)||P-125|
|Natural Gas Valve (assembled with all fittings)||P-127|
|Orifice Spud Mounting Bracket||P-111|
|Safety Gas Valve – 1/8″ MPT x 1/8″ FPT*||P-112B|
|90° Flared Tube Fitting – 3/8″ O.D. x 1/8″ FPT x 1/8″ NPT||P-113A|
|Thermocouple for Safety Valve**||P-114B|
|Thermocouple Mounting Clip for P-112A* & P-114**||P-115|
|Cylinder Mounting Bracket||P-118|
|Thumbscrew w/Shoulder, 3/8-16||P-119|
|Natural Gas Regulator – Set 6.0″ W.C.P.||P-122|
|Hose Assembly & Regulator||P-123A|
* P-112A for replacement on heaters manufactured prior to 10/03, P-112B post 10/03.
** P-114B thermocouple is only compatible with the P-112B gas valve.