Factory Direct Re-Verber-Ray Replacement Parts
Current processing time is 1-2 business days. Due to delays with our shipping partners, delivery times can not be guaranteed.
USE CODE 'FALL10' FOR 10% OFF
Re-Verber-Ray Portable Heater Parts
Our portable infrared heaters are designed for commercial outdoor construction areas or inside areas under construction. They are ideal when temporary heat is required or where a permanent energy source is not available. Our portable construction heater, high-intensity heaters mount on top of a 20-lb., 10-inch base LP tank.
| Part Description | Part Number |
|---|---|
| Rayhead Assembly | P-101 |
| Rods | P-102 |
| Reflector Assembly | P-105 |
| Outer Heater Casing | P-107 |
| LP Gas Valve (assembled with all fittings) (Contact factory for heaters built before Oct. 2003) | P-126 |
| Natural Gas Valve (assembled with all fittings) (Contact factory for heaters built before Oct. 2003) | P-128 |
| Part Description | Part Number |
|---|---|
| Rayhead Assembly | P-103 |
| Rods | P-104 |
| Reflector Assembly | P-106 |
| Outer Heater Casing | P-108 |
| LP Gas Valve (assembled with all fittings) (Contact factory for heaters built before Oct. 2003) | P-125 |
| Natural Gas Valve (assembled with all fittings) (Contact factory for heaters built before Oct. 2003) | P-127 |
| Part Description | Part Number |
|---|---|
| Orifice Fittings | P-110B |
| Orifice Spud Mounting Bracket | P-111 |
| Safety Gas Valve – 1/8″ MPT x 1/8″ FPT* (Contact factory for heaters built before Oct. 2003) | P-112B |
| 90° Flared Tube Fitting – 3/8″ O.D. x 1/8″ FPT x 1/8″ NPT | P-113A |
| Thermocouple for Safety Valve** (Contact factory for heaters built before Oct. 2003) | P-114B |
| Thermocouple Mounting Clip for P-112A* & P-114** | P-115 |
| Cylinder Mounting Bracket | P-118 |
| Thumbscrew w/Shoulder, 3/8-16 | P-119 |
| Natural Gas Regulator – Set 6.0″ W.C.P. | P-122 |
| Hose Assembly & Regulator | P-123A |
* P-112A for replacement on heaters manufactured prior to 10/03, P-112B post 10/03.
** P-114B thermocouple is only compatible with the P-112B gas valve.
