Factory Direct Re-Verber-Ray Replacement Parts

5% Off Savings! Use Coupon Code "WINT5"

Shopping cart

Pick List

Re-Verber-Ray Tube Heater Parts

Detroit Radiant Products Company offers the most extensive line of low-intensity infrared radiant tube heaters available. From our award-winning, engineered vacuum systems to our patented, two-stage line of heaters, you’ll find a product that ideally suits your needs. Re-Verber-Ray® low-intensity heaters are a little- to no-maintenance, cost-effective and energy-efficient solution for heating a wide variety of areas.

 

Charts

RE-VERBER-RAY HL3 SERIES TUBE HEATER (Manufactured 08/14 to Present)

Reference the Installation Manual for additional parts. Download

Common Components

Part Description Original
Part Number

Replacement
Part Number

Fan TP-55A TP-55A
Fan (175,000 BTU and above only) TP-3215 TP-3215
Air Pressure Switch See Below See Below
Circuit Board TP-851B1 TP-851B1
Wire Harness TP-3252 TP-3252
Relay (note: this factory installed option is not on all units) TP-13252 TP-13252
Ignition Device TP-50 TP-50A
50-125 MBH Low Stainless Steel Burner (Nat & LP Gas) TP-3072 TP-3072
150 MBH Mid Stainless Steel Burner (Nat & LP Gas) TP-201B TP-201B
Natural Gas Valve TP-3140 TP-3140
LP Gas Valve TP-3141 TP-3141
Transformer TP-826 TP-826
24V Yellow Operational  Indicator Light TP-828 TP-828
24V Green Operational Indicator Light TP-1428 TP-1428
Flame Rod TP-222 TP-222
16″ Tube TP-3080A TP-3380
Combustion Chamber3, 50-125 MBH (Coated Aluminized Steel) TP-26A TP-26A
Combustion Chamber3, 150-200 MBH (Titanium Coated Steel) TP-26B TP-26B
Combustion Chamber3, 75-150 MBH (409 Stainless Steel) TP-26E TP-26E
Radiant Tubes (Coated Aluminized Steel) TP-26A TP-26A
Radiant Tubes (304 Stainless Steel) TP-26D TP-26D
10 Ft. Highly Polished Aluminum Reflector Section4 TP-20C TP-20C
Baffle TP-65I TP-65I

 

1 Cross Reference Number (on unit): 35-66. NOTE: This board had an on-board red diagnostic light.

2 When the optional HLRP Isolation Relay option is selected, two relays are installed.

3 Refers to the first 10 ft. section of tubing downstream of the burner.

4 Models with stainless steel upgrades require TP-20D 10 ft. reflector sections.

Pressure Switches

BTU/H Range (x1000) 65-75 100-125 150-200
Part Number TP-264D TP-1264A TP-264F
X-Ref., IS220- -20051F5170 -25051F5127 -35051F5132
Normal Setting Open Open Open