Factory Direct Re-Verber-Ray Replacement Parts
Current processing time is 3-5 business days. Due to delays with our shipping partners, delivery times can not be guaranteed.
USE CODE 'WINTER10' FOR 10% OFF
Re-Verber-Ray Tube Heater Parts
Detroit Radiant Products Company offers the most extensive line of low-intensity infrared radiant tube heaters available. From our award-winning, engineered vacuum systems to our patented, two-stage line of heaters, you’ll find a product that ideally suits your needs. Re-Verber-Ray® low-intensity heaters are a little- to no-maintenance, cost-effective and energy-efficient solution for heating a wide variety of areas.
RE-VERBER-RAY DTH(S)-2 SERIES TUBE HEATER (Manufactured 1988 to 1989)
Common Components
|
||
| Part Description | Original Part Number |
Replacement |
| Fan | TP-55A | TP-55A |
| Normally Open Pressure Switch (Burner) | TP-61B | TP-264B |
| Normally Closed Pressure Switch (Exhaust) | TP-60B | TP-60D |
| Radiant Sensor | TP-64 | TP-64 |
| Glo-Bar | TP-50 | TP-50A |
| Circuit Board | TP-77 | Consult Factory* |
| Burner | TP-48 | TP-48 |
| Natural Gas Valve | TP-36A or TP-36B | Consult Factory** |
| Propane Gas Valve | TP-36C | Consult Factory** |
| Burner Housing | TP-42 | TP-42 |
| 16″ Burner Tube | TP-6A | TP-6A |
| First 10 ft. Tube1 | TP-8D or TP-26B | TP-8D or TP-26B |
| 10 ft. Reflector Section2,3 | TP-20A or TP-20C | TP-20A or TP-20C |
| Downstream Reflector Section(s) (DTH only)2 | TP-20B | TP-20B |
1 Use TP-8D for DTH Series. Use TP-26B for DTHS Series.
2 The first 10 ft. section of reflector differs from the remaining 10 ft. downstream sections of reflector for the DTH Series only. Use TP-20A for the first 10 ft. section of reflector and TP-20B for the remaining sections.
3 Use TP-20C for DTHS Series.
* The original circuit board TP-77 (discontinued) must be replaced with TP-78D circuit board, TP-390 adapter, and TP-78B wire harness. A new valve is also required. Consult factory.
** When replacing a TP-36A (used on Nat. Gas, 125 MBH), use TP-107. When replacing a TP-36B (used on Nat. Gas, 150 MBH), use TP-79. When replacing the TP-36C (used on Propane, 125 & 150 MBH), use TP-107P. When replacing the gas valve, the circuit board must also be replaced.
Circuit Boards |
|
| Part Description | Part Number |
| Original Circuit Board | TP-77 |
| Cross Reference Number (on unit) | 5001A-1 |
| Harness | TP-78B |
| Replacement Board | TP-78D |
| Adaptor4 | TP-3902 |
4 Use TP-390 adaptor to attach replacement board TP-78D to original wiring harness TP-78B.
