Re-Verber-Ray Tube Heater Parts
Detroit Radiant Products Company offers the most extensive line of low-intensity infrared radiant tube heaters available. From our award-winning, engineered vacuum systems to our patented, two-stage line of heaters, you’ll find a product that ideally suits your needs. Re-Verber-Ray® low-intensity heaters are a little- to no-maintenance, cost-effective and energy-efficient solution for heating a wide variety of areas.
RE-VERBER-RAY HL3 SERIES TUBE HEATER (Manufactured 07/08 to 09/12)
|Part Description|| Original|
|Pressure Switch||See Below||See Below|
|Relay (Note: This factory installed option is not on all units)||TP-13252||TP-13252|
|50-100MBH Burner (Natural Gas Only)||TP-3070||TP-3072|
|50-100MBH Burner (Propane Gas Only)||TP-200A||TP-3072|
|125MBH Burner (Natural and Propane Gas)||TP-201B||TP-3072|
|150-200MBH Burner (Natural and Propane Gas)||TP-201B||TP-201B|
|Natural Gas Valve||TP-3140||TP-3140|
|Propane Gas Valve||TP-3141||TP-3141|
|24V Yellow Indicator Lights||TP-828||TP-828|
|24V Green Indicator Lights||TP-1428||TP-1428|
|16″ Burner Tube||TP-3080A||TP-3380|
|Combustion Chamber3, 50-125MBH (Coated Aluminized Steel)||TP-26A||TP-26A|
|Combustion Chamber3, 150-200MBH (Titanium Coated Steel)||TP-26B||TP-26B|
|Combustion Chamber3, 75-150MBH (409 Stainless Steel)||TP-26E||TP-26E|
|Radiant Tubes (304 Stainless Steel||TP-26D||TP-26D|
|10 ft. Reflector Section4||TP-20C||TP-20C|
1 Cross Reference Number (on unit): 35-66. NOTE: This board had an on-board red diagnostic light.
2 When the optional HLRP Isolation Relay option is selected, two relays are installed.
3 Refers to the first 10 ft. section of tubing downstream of the burner.
4 Models with stainless steel upgrades require TP-20D 10 ft. reflector sections.
|BTU/H Range (x1000)||65-75||100-125||150-200|