Low Intensity Tube Heaters

Home Products Commercial & Industrial Heating Products Low Intensity Infrared Tube Heaters HL3 Series

LOW INTENSITY INFRARED TUBE HEATERS

  • Comfort Heating
    • DST Designer Series Low Intensity

      DST Series, Infra Red Heaters, Patio Heater, Low Intensity Tube Heaters

      DST Series

      Gas-Fired Low Intensity Patio Heater

      • Highly decorative stainless housing with 3/4″ modular grille
      • 26 linear feet of radiant tube in a 10 ft. span
      • Indoor and outdoor certified
  • Commercial & Industrial
    • REV Series Premier Plus, Two Stage

      REV Series

      Premier Plus, Two Stage, Multi-Configurable, Low Intensity Tube Heater

      • Adjustable, solid aluminum extruded reflector
      • Single Pass and Dual Pass geometry with models capable of achieving an Infrared Factor (IF) up to 15 and Radiant Emission Value (REV) in excess of 110
      • Pre-heated combustion air and insulated air pockets
    • MP Series Modulating

      MP Heater, Low Intensity Tube Heaters, Modulating Plus Low Intensity Tube Heater

      MP Series

      Modulating Plus Low Intensity Tube Heater

      • "Blast Mode"™ for environmental demands
      • Three performance curve modes
      • Full proportional-integral derivative logic
    • HL3 Series Premier, Two Stage

      HL3 Heater, Low Intensity Tube Heaters, infrared tube heaters

      HL3 Series

      Premier, Two Stage, Low Intensity Tube Heater

      • Fewer on/off cycles over single stage
      • Documented fuel savings
      • Enhanced comfort
    • DX3L Series Premier, Single Stage

      DX3L Series, Low Intensity Tube Heaters, Infrared Tube Heaters

      DX3L Series Low Intensity Tube Heaters

      Premier, Single Stage, Low Intensity Tube Heater

      • High quality construction materials enhance performance and equipment longevity
      • Specially designed stainless steel burner
    • DET3 Series Economical, Two Stage

      DET3-Heater

      DET3 Series

      Economical, Two Stage, Low Intensity Infrared Heater

      • Fewer on/off cycles over single stage
      • Streamlined for economy
      • Enhanced comfort
    • DES3 Series Economical, Single Stage

      Tube Heater, Low Intensity Tube Heater, DES3 Series Single-Stage

      DES3 Series Tube Heater

      Economical, Single Stage, Low Intensity Tube Heater

      • Streamlined for economy and designed without sacrificing performance
      • Specially designed stainless steel burner
  • Specialty
    • REV Series Premier Plus, Two Stage

      REV Series

      Premier Plus, Two Stage, Multi-Configurable, Low Intensity Tube Heater

      • Adjustable, solid aluminum extruded reflector
      • Single Pass and Dual Pass geometry with models capable of achieving an Infrared Factor (IF) up to 15 and Radiant Emission Value (REV) in excess of 110
      • Pre-heated combustion air and insulated air pockets
    • -SB & -SS Series Stainless

      V2SS Tube Heater, -SS Series, Stainless Steel Infrared Tube Heaters

      -SB & -SS Series

      Stainless Steel Infrared Tube Heaters

      • The best in durability & performance
      • 100% upgrade or select optional upgrades
      • For wet, contaminated or outdoor applications
    • HLV Series Two Stage Vacuum

      HLV Series Two-Stage Vacuum

      HLV Series

      Two Stage, Multiple Burner, Engineered Vacuum System

      • Ideal for applications with design challenges
      • Independent tandem burner design
      • Requires minimal building penetrations
    • SV Series Single Stage Unitary Vacuum

      SV Series, SINGLE-STAGE, UNITARY VACUUM SYSTEM

      SV Series

      Single Stage, Unitary Vacuum Heating System

      • Capable of extended vent runs
      • Reliable performance in high wind conditions
      • Quiet vacuum (negative pressure) operation
    • CL3 Series Two Stage, Low Clearance

      CL3 Series

      Two Stage Low Clearance, Low Intensity Infrared Tube Heater

      • Complies with NFPA 30A for installation in CNG maintenance facilities
      • Perfect for installation requiring lower clearances to combustibles
    • CX3 Series Single Stage, Low Clearance

      CX3 Series

      Single Stage Low Clearance, Low Intensity Infrared Tube Heater

      • Complies with NFPA 30A for installation in CNG maintenance facilities
      • Perfect for installation requiring lower clearances to combustibles
  • Residential

HL3 Series

Premier, Two Stage, Low Intensity Infrared Heater

The HL3 Series, packed with quality features, represents today’s most energy efficient line of infrared tube heaters. Our patented two stage technology, incorporated into the HL3 Series, provides more comfort while saving valuable energy dollars. In addition, the highest quality materials and construction features ensure years of reliable and efficient operation. No other infrared heater can match the performance and quality of the HL3 Series.

Send via Email:

Key features

  • Fewer on/off cycles over single stage
  • Documented fuel savings
  • Enhanced comfort
Looking to heat a specific space? Check out examples of
applications here

Specifications

  • BTU Range: 65,000 – 200,000 BTU/h
  • Lengths: 20-70 ft.
  • Gas Type: Natural or Propane
  • Combustion Chamber: Black-Coated Aluminized or Titanium
  • Radiant Tubes: Black-Coated Aluminized Steel
  • Certification: CSA, IAS
  • Warranty: 3-5-10 (Components/Tubes/Burner)
Get a quote! Locate a distributor get a quote