Low Intensity Tube Heaters
LOW INTENSITY INFRARED TUBE HEATERS
- Comfort Heating
- DST Designer Series Low Intensity
DST Series
Gas-Fired Low Intensity Patio Heater
- Highly decorative stainless housing with 3/4″ modular grille
- 26 linear feet of radiant tube in a 10 ft. span
- Indoor and outdoor certified
- DST Designer Series Low Intensity
- Commercial & Industrial
- REV Series Premier Plus, Two Stage
REV Series
Premier Plus, Two Stage, Multi-Configurable, Low Intensity Tube Heater
- Adjustable, solid aluminum extruded reflector
- Single Pass and Dual Pass geometry with models capable of achieving an Infrared Factor (IF) up to 15 and Radiant Emission Value (REV) in excess of 110
- Pre-heated combustion air and insulated air pockets
- MP3 Series Modulating
MP3 Series
Modulating Plus Low Intensity Tube Heater
- Fully modulating for enhanced energy efficiency
- BACnet, Modbus, and Zigbee compatible with TH-PC-M thermostat
- Modulation can be automatically or manually controlled
- HL3 Series Premier, Two Stage
HL3 Series
Premier, Two Stage, Low Intensity Tube Heater
- Fewer on/off cycles over single stage
- Documented fuel savings
- Enhanced comfort
- DX3L Series Premier, Single Stage
DX3L Series Low Intensity Tube Heaters
Premier, Single Stage, Low Intensity Tube Heater
- High quality construction materials enhance performance and equipment longevity
- Specially designed stainless steel burner
- DET3 Series Economical, Two Stage
DET3 Series
Economical, Two Stage, Low Intensity Infrared Heater
- Fewer on/off cycles over single stage
- Streamlined for economy
- Enhanced comfort
- DES3 Series Economical, Single Stage
DES3 Series Tube Heater
Economical, Single Stage, Low Intensity Tube Heater
- Streamlined for economy and designed without sacrificing performance
- Specially designed stainless steel burner
- REV Series Premier Plus, Two Stage
- Specialty
- REV Series Premier Plus, Two Stage
REV Series
Premier Plus, Two Stage, Multi-Configurable, Low Intensity Tube Heater
- Adjustable, solid aluminum extruded reflector
- Single Pass and Dual Pass geometry with models capable of achieving an Infrared Factor (IF) up to 15 and Radiant Emission Value (REV) in excess of 110
- Pre-heated combustion air and insulated air pockets
- -SB & -SS Series Stainless
-SB & -SS Series
Stainless Steel Infrared Tube Heaters
- The best in durability & performance
- 100% upgrade or select optional upgrades
- For wet, contaminated or outdoor applications
- HLV Series Two Stage Vacuum
HLV Series
Two Stage, Multiple Burner, Engineered Vacuum System
- Ideal for applications with design challenges
- Independent tandem burner design
- Requires minimal building penetrations
- SV Series Single Stage Unitary Vacuum
SV Series
Single Stage, Unitary Vacuum Heating System
- Capable of extended vent runs
- Reliable performance in high wind conditions
- Quiet vacuum (negative pressure) operation
- CL3 Series Two Stage, Low Clearance
CL3 Series
Two Stage Low Clearance, Low Intensity Infrared Tube Heater
- Complies with NFPA 30A for installation in CNG maintenance facilities
- Perfect for installation requiring lower clearances to combustibles
- CX3 Series Single Stage, Low Clearance
CX3 Series
Single Stage Low Clearance, Low Intensity Infrared Tube Heater
- Complies with NFPA 30A for installation in CNG maintenance facilities
- Perfect for installation requiring lower clearances to combustibles
- REV Series Premier Plus, Two Stage
- Residential
- LD3 Series Premier Residential, Two Stage
LD3 Series
Residential, Two Stage, Low Intensity Tube Heater
- Designed for low ceiling applications
- Documented fuel savings
- Fewer on/of cycles over single stage
- LS3 Series Premier Residential, Single Stage
LS3 Series Heater
Residential, Single Stage, Low Intensity Tube Heater
- Designed for low ceiling applications
- Ideal for residential garages, patios, workshops, and more
- LD3 Series Premier Residential, Two Stage
REV Series
Premier Plus, Two Stage, Multi-Configurable, Low Intensity Tube Heater
REV Series featuring adjustable reflector, pre-heated combustion air, & much more!
Thanks to its flexibility and efficiency, the REV Series is well-suited to a myriad of application types.
Documentation
- REV Series Brochure
- Single Pass vs. Dual Pass Brochure
- REV Submittal Data Sheet*
- REV Submittal Data Sheet-Full Package*
- REV Clearances to Combustibles Data Sheet*
- REV Series Insert Installation, Operation, Parts and Maintenance Manual
- Tube Heater Packing List
- Controls Packing List
- Venting Packing List
- Tube Heater Application Guidelines
* Click here for full specification documentation.
With a host of innovative and patented features never before seen in the marketplace, the REV Series is here to revolutionize the infrared industry. The adjustable reflector and pre-heated combustion air mean the REV Series leads the pack in heater efficiency. High quality materials and superior workmanship ensure years of reliable and efficient operation for heaters that are truly in a class of their own.
Need clarification on Single Pass vs. Dual Pass technology? Click here to learn more.
Key features
- Adjustable, solid aluminum extruded reflector
- Single Pass and Dual Pass geometry with models capable of achieving an Infrared Factor (IF) up to 15 and Radiant Emission Value (REV) in excess of 110
- Pre-heated combustion air and insulated air pockets
Looking to heat a specific space? Check out examples of
applications here
applications here
Specifications
- BTU Range: 65,000 – 200,000 BTU/h
- Lengths: 20-60 ft.
- Gas Type: Natural or Propane
- Emitter Tubes: 4″ Titanium Stabilized or Aluminized Steel (Combustion Chamber) and .95 Emissive Black-Coated Aluminized Steel (Radiant Tubes)
- Reflector: Extruded Aluminum with .070 Wall Thickness
- Certification: CSA
- Warranty: 3-5-10 (Components/Tubes/Burner)
- US Patent No. 11,808,461
Get a quote! Locate a distributor get a quote